Using Math with Fields in AutoCAD

Here is an example of using math with fields in AutoCAD. Suppose you are working on a drawing that because of its size, it cut up into sheets, or layouts.

You want to include match lines on each layout. How can you easily reference the previous and next layouts on each sheet? Follow along.

In this example, we are working on layout #2 (the name of the layout is the numeral “2”). We want to make a reference to the layout preceding this one.

Start by running the FIELD command, and choose Formula.

Field - Add Formula 300w" sizes="(max-width: 608px) 100vw, 608px" />

Then in the formula area, right-click and choose Add Field.

Nesting a field 300w" sizes="(max-width: 608px) 100vw, 608px" />

Now we are adding a field to a field. In the second Add Field dialog, choose system variable from the field names, then CTAB from the list of variables.

Choosing the correct field 300w" sizes="(max-width: 654px) 100vw, 654px" />

Don’t worry about the format in the last column on the right. Click OK.

Doing the Math 300w" sizes="(max-width: 608px) 100vw, 608px" />

Now notice that the field (shown with a gray background) is in the Formula Box. Now do your math, and enter minus one after it. It should look like the example above. Click OK. Now add any other text you want to this string.

Copy your string and change the minus sign to a plus sign to get the Next sheet reference.

The finished example is shown below. Obviously this only works if your layout tabs are in order (1, 2, 3, 4, 5, etc.), but presuming you set this up on layout 1, you can copy this layout down the line, renaming them accordingly, and the sheet references to the prior and next sheet will remain correct.

Sheet References 300w" sizes="(max-width: 590px) 100vw, 590px" />