Avatech Tricks: Add Smart Blocks to AutoCAD Electrical15 Apr, 2005 By: R. Eric France Cadalyst
Your Proprietary Components not in AutoCAD Electrical? Use the Black Box Builder to Add Them.
Anyone who has seen a demo of AutoCAD Electrical can tell you how impressive the software is and how quickly and accurately an electrical designer can use it to get work done. The library of standard electrical symbols and the catalogs of manufacturers' components are sizable and well suited to documenting machine controls designs. However, what if you have critical components that aren't in the library? Black Box Builder to the rescue!
Dispelling the Mystery
In AutoCAD Electrical, a block needs certain attributes to interact effectively with the utilities provided in the software. While you can add those attributes with the normal AutoCAD methods of creating attributes, the Black Box Builder provides a concise checklist to guarantee the blocks will work. The process is simply a matter of selecting the block entities, adding standard attributes and wire connection points and WBlocking out to the default User folder. Let's take a look at how this is done.
Explode Your Block
Figure 1. Here is a proprietary component after it has been exploded.
Into the Black Box
Initiate the Black Box Builder from the Components pull-down under Symbol Library or from the Miscellaneous button on the Main Electrical 2 toolbar and the Schematic Tool Palette. Once started, the command prompts you to select the block geometry, and if no Component attributes are found (i.e., Tag1, Tag2, etc.), asks you to select the type of symbol you are creating. Most custom symbols will likely be Parent symbols, for example an Aux. Contact would be a Child symbol.
Add Standard Attributes
Next, add standard attributes by selecting the Standard button. Here you find the most likely attributes needed for AutoCAD Electrical to interact with your block. Tag1 identifies this as a Parent symbol. Mfg, Cat and Assycode store catalog information. Desc1-3, Inst and Loc let you identify how and where this component will be used. Family tells the software which table to find the component in the catalog database. Place these attributes in your block using the Insert Attribute button at the bottom of the dialog. Most let you adjust height and justification, but some are normally invisible and do not. A Pick Text button converts existing Text or Attributes into the standard ones that AutoCAD Electrical expects. When you've finished placing all the standard attributes you want in your block, select Back to Main Menu.
Add Wire Connections
Figure 2. You add standard and wire connection attributes to your block via the Wire Connections dialog box.
Add More Attributes and WBlocking
Finally, consider if any of the other attributes are needed, such as Dashed Link Line connection points, Rating or Position attributes, etc. If not, you're ready to WBlock your updated custom block. Selecting the WBlock button prompts you for a name and location of your block, with the User folder being the default location.
Naming conventions in AutoCAD Electrical dictate the following: the first character is H or V (for horizontal or vertical orientation of the wire it is being placed on), the second and third characters are the 2-digit family code, the fourth character is a 1 for a
Figure 3. After completing and naming your component, you can place it into a drawing. Here is a completed proprietary component inserted into an AutoCAD Electrical circuit.
Icon Menu Wizard and Catalog Editing
Now that you created your proprietary component block, you can use the Icon Menu Wizard to add your block to the Insert Component menu. You can also add a table to the DEFAULT_CAT.MDB for your AV Family and store the manufacturer and catalog information for this component to show up on a bill of materials report for a later project. While both of these are possible, they are beyond the scope of this article. Good Luck in all your custom Smart block creation endeavors!
Avatech Solutions is a leader in design and engineering technology with expertise in CAD software, data management and process optimization for the manufacturing, engineering, building design, and facilities management industries. To obtain exclusive offers, important updates and special invitations to local workshops and online events, subscribe to eAvaNews - monthly e-newsletters that offer a wealth of manufacturing/mechanical, architectural and building design, civil engineering and educational design automation information from Avatech's top applications engineers.
In her easy-to-follow, friendly style, long-time Cadalyst contributing editor and Autodesk Technical Evangelist Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD video tips. Subscribe to the free Cadalyst Video Picks newsletter and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!