Early Design CAD Design Testing & Analysis Collaboration Hardware   3D Printers   Displays/Monitors   Graphics Cards   Wide-Format Printers/Scanners   Workstations Tips & Tools

# Find the Midpoint Between Two AutoCAD Objects

24 Nov, 2014

Have you ever wanted to quickly find the center of a box? Or to determine the midpoint between two objects — 2D or 3D? If so, watch this video tip from Cadalyst and Lynn Allen to learn a speedy technique that will help eliminate construction lines and get the job done in seconds!

### Video Transcript

Hello there, this is Lynn Allen. Welcome to another AutoCAD tip courtesy of Cadalyst magazine. Thank you so much for joining me. Today I'm going to share with you a very cool object snap. It's an object snap override actually, and it's the midpoint between two points. I think if you knew about it, you'd find all different kinds of places where you could use it. So, it allows you basically to pick any two points on the screen -- it can be on two different objects, it could be in 2D, it could be in 3D -- and it will very quickly find the midpoint between those two points. Let me show you how it works.

So let's say I wanted to put a circle right in the center of this box. Many of us would draw our construction line from one corner to the other and then grab the midpoint to place our circle. Some of you would use object snap tracking. I am going to go in the Circle command. When it asks me for the center, I'm going to do a right-click. This time I'm going to do it from the shortcut menu. Go to Snap Override because it is an override -- it's not a object snap you can set in a running format. You can't always have it on. And there it is -- the Mid Between 2 Points. I'm going to do the same thing I would do if I was drawing a construction line. I don't have to, but there's my circle. Piece of cake. Easy, right? Right in the center of the box -- midpoint between two points.

Sometimes you want to find the midpoint between two separate objects, and you want to work with that. So let's draw a circle between these two rectangles. Same idea, go into the Circle command. For those of you who like to type, you can also key in MTP or M2P. Apparently the AutoCAD group could not come to an agreement that year, so there's two different ways that you can get to it. I'll type in MTP. Same idea. I'll grab the midpoint of that box and that line right there, and now that circle is right in the middle between those two boxes. Okay, so that's another way of using it. Like I said, it works in 2D, it works in 3D, and it works great in 3D actually, for those of you who have moved to 3D.

So let's do one more example. So we did a right-click to get to it, or you typed in MTP. I want to take this room tag and I want to move it so it's right in the middle of that room. It's up a little bit too far. Let's grab it. Hit on that grip, make it a hot grip. Now same deal, except I'm going to M2P just to prove to you that you can key it in two different ways. Great trivia question, by the way. And then I'm going to grab this corner down here and I'm going to grab this corner up here. And it's going to put it right in the center of the room. I love that. How easy is that? Easy, easy -- no construction lines, totally accurate and very low stress.

So, don't forget that -- the midpoint between two points, MTP or M2P. Impress your friends. Thank you for joining me, and I'll see you back here in two more weeks.

Note: Comments are moderated and will appear live after approval by the site moderator.

 AutoCAD Tips! In her easy-to-follow, friendly style, long-time Cadalyst contributing editor Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD Video Tips. Subscribe to the free Cadalyst Video Picks newsletter, and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!