GIS

Louisiana Utility Dispels GNSS Signal Shadow with Trimble Floodlight

4 Apr, 2012 By: Kevin Corbley

Satellite shadow–reduction technology enables St. Charles Parish Waterworks crews to map infrastructure features under tree cover.


The last straw for utility personnel in St. Charles Parish, Louisiana, came when an underground water pipeline burst beneath a busy street. Traffic had to be diverted as the water continued to spill onto the pavement. An hour passed before workers from the Waterworks Department found the shutoff valve and stopped the deluge. The delay was caused by a faulty map that showed the valve's location on the wrong side of the street.

As is true for many local government departments, the St. Charles Waterworks relied on as-built drawings and sketches supplied by developers and engineering firms to keep the network of underground water pipes updated in its GIS. At the time, the parish had no other option because it lacked internal mapping capabilities.

In 2008, St. Charles created a GIS Office to support mapping needs of all other parish departments and hired Luis Martinez to manage it. Fortunately, Martinez had been trained to use GNSS technology for GIS data collection in his previous position. He convinced the parish it would be cost-effective to invest in mapping- and survey-grade GNSS (global navigation satellite system) equipment and train personnel to use it as part of their daily operations.

"The first personnel we trained were the Waterworks and Public Works crews," said Martinez. He explained that Waterworks is responsible for maintaining, repairing, and upgrading the parish's network of above- and below-ground water pipelines. Public Works manages the storm protection and drainage infrastructure, such as catch basins, ditches, and levees.

The GIS Office maintains a parish-wide, Internet-accessible GIS comprising layers for nearly all departments. Aside from Public Works, the Waterworks Department has the most rapidly evolving geospatial data layers in the parish. With new water pipes being installed and old ones being replaced, the Waterworks infrastructure map is constantly in flux. Handheld GNSS-based GIS data collection units were seen as the ideal solution for keeping layers accurate and up to date.

Waterworks crews experienced problems with accuracy, however, when working beneath the stately oak trees that line many parish residential streets. The oak canopies deflect and partially block GNSS signals from reaching the receivers, impairing productivity through a phenomenon called satellite shadow. This same signal deflection problem often challenges mapping crews working among tall buildings in cities.

Martinez quickly identified the satellite shadow problem and upgraded the parish GNSS equipment to the Trimble GeoExplorer 6000 series. These handheld GIS mapping devices come equipped with Trimble Floodlight capability, which overcomes the productivity-reducing effects of satellite shadow without sacrificing accuracy. The technology accomplishes this through a combination of tracking algorithms, altitude-constrained positioning, and multi-constellation positioning, which benefits from both GPS and GLONASS (Russia's version of GPS).

Waterworks personnel began using Trimble GeoExplorer 6000 GeoXH handhelds and Esri ArcPad data collection software at every excavation project. As new pipe is laid in the ground, the handheld devices are used to map the location and depth with submeter accuracy before it is buried. Crews use pull-down Esri ArcPad menus on the touch screen to collect key descriptive data relating to each asset, such as the size and composition of the conduit. In addition, locations of other important items such as shutoff valves are mapped onto the GIS layer with the same precision.




St. Charles Waterworks' field workers use Trimble GeoExplorer 6000 handheld computers to map water infrastructure features such as valves and culverts.


"Before Floodlight, we could only get a strong signal from about six satellites, depending on the canopy," said Martinez. "[Even with differential correction,] only 60 percent of our points achieved the desired 15-cm / 6-inch accuracy, while the majority of the rest were off by as much as three feet or more."

Today, Waterworks crews routinely lock onto 12–13 satellites and achieve 15-cm/6-inch accuracy for 85 to 90% of all points in feature mapping projects with the Trimble GeoExplorer 6000 handheld. In the field, they use a Bluetooth connection and cell phone to access differential correction points published on the Internet by a local continuously operating reference station (CORS). Points are corrected in real time with Trimble GPScorrect extension for Esri ArcPad software running on the handheld.

"Floodlight allows us to maintain mapping accuracy," explained Martinez, "and it pays for itself by saving time for field crews. Without the technology, crews had to measure offset positions to get out from under the trees."

This task became unnecessary once they obtained the Trimble GeoExplorer 6000 handhelds. Martinez said that measuring an offset could take two to five extra minutes to collect a single position, compared to just 15 seconds when occupying the feature itself. In addition, Floodlight technology allows the receiver to maintain satellite lock when it is put back in the vehicle for the drive to the next collection point. This shaves several more minutes off each point collection.

"Waterworks is so pleased with the GeoExplorer 6000s that they plan to buy two just for their department," said Martinez. "They will integrate the mapping units with electromagnetic line-locating devices to map the pipes already buried underground."

The St. Charles GIS has never been more up-to-date and information-rich than it is now, but Martinez sees room to grow and is considering expanding the use of Trimble GIS mapping equipment to other departments, including Planning and Zoning. Inspectors from this department will soon carry integrated GIS mapping devices that enable them to document code violations in writing with time- and location-stamped photographs.


About the Author: Kevin Corbley


Add comment

Note: Comments are moderated and will appear live after approval by the site moderator.

AutoCAD Tips!

Lynn Allen

Autodesk Technical Evangelist Lynn Allen guides you through a different AutoCAD feature in every edition of her popular "Circles and Lines" tutorial series. For even more AutoCAD how-to, check out Lynn's quick tips in the Cadalyst Video Gallery. Subscribe to Cadalyst's free Tips & Tools Weekly e-newsletter and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!
Follow Lynn on Twitter Follow Lynn on Twitter



Poll
Which file format do you use most often for CAD drawing/model exchange?
Native format
PDF
3D PDF
DWF
STEP or IGES
JT
IFC
Other
Submit Vote