Management

Clean Up Lines with AutoCAD's Change Command

26 Oct, 2015

The Change command is an old command, but a trusty one (especially if you work on drawings created by AutoCAD amateurs). Join Autodesk Evangelist Lynn Allen as she shows you how to quickly clean up lines that don’t meet perfectly, and how to force lines to be orthogonal.

Video Transcript

Hello there, this is Lynn Allen. Thanks for joining me for another AutoCAD tip, courtesy of Cadalyst magazine. I hope you are having a great week so far. Mine's going pretty well.

Today I'm going to share with you an add-on to a tip that I gave you five years ago. I'm sure you've seen all of my video tips since, right? I'm sure I look exactly the same as I did five years ago, right? That would be nice. I'm going to share with you a tip that has to do with the Change command. The Change command has been around since the very early days of AutoCAD. That means that it was back when dinosaurs roamed the Earth. It is an old, dusty command. But I'm telling you it comes in handy. It can do some things that takes many more steps in the new commands inside of AutoCAD.

For example, if you take a look at this drawing, these lines look like they are going horizontal, but they are off by just a little bit. We've all worked with people who think they know AutoCAD, but they really don't. They probably shouldn't be using it.

This command comes in handy when you are dealing with people like that. I want those to be horizontal, all right? There are variety of different ways of doing it, including erasing them and doing them again. Let me show you how it's done with the Change command. The Change command is so old that you have to type it in. It's not in the Ribbon or menu or anything; it's not worthy of that, apparently.

I'm going to grab these three lines that are not horizontal. Here's the catch. You have to have the Ortho on, otherwise very different events will occur. Now basically what you are going to do (let's turn on my object snaps), you pick the point that you want to use as the new endpoint for these lines where the x is, and you'll see it straighten them all out. It kept the beginning points, the start points of the lines, and I just modified the other so they will be horizontal. And then you can change the endpoints if you needed to. Nevertheless, they are horizontal. Yay! Saved me some steps. Better than drawing them all over again.

So here's another situation. Those lines look like they all converge on that corner. But then, have you ever done this? You zoom in, and you find out they did not use object snaps. It's not that hard, people! So what do you do? I suppose you could fill it with a zero degree radius. You could erase them and start all over again. I'm going to show you how to do it with just one command — the Change command. Easy steps.

Let's go back in the Change command. Now this time I need my Ortho off, otherwise they are all going to end up going horizontally or vertically. That's not what we want. I'm going to come in here, and I'm going to select all of these objects. Now you are going to pick the point where you want the real convergence point to be — the end point of all those lines. Which one do you want that to be? Let's zoom in. I'd like it to be that point right in there, right in the middle. Now watch all the lines. Check it out! One command. One step. It's all fixed. You don't have to get too mad at the guy that made that terrible mistake, well maybe actually you probably should anyway. Easy, easy, easy.

So those are two more tips with the change command. Really handy command that's top secret. Nobody knows about it except for you and me. Impress your friends. I'll see you back here in two more weeks.

 


Add comment

Note: Comments are moderated and will appear live after approval by the site moderator.

Cadalyst Video Gallery
Create Smart Centerlines in AutoCAD Video
Create Smart Centerlines in AutoCAD   23 Apr, 2018

It’s not uncommon to add centerlines while dimensioning -- but are your centerlines smart? AutoCAD tipster Lynn Allen shows you the ins and outs of associative centerlines, and explains how to disassociate and reassociate them! More>>

AutoCAD Dialog Box Tips You Need to Know Video
AutoCAD Dialog Box Tips You Need to Know   9 Apr, 2018

AutoCAD 2017 added a few nice enhancements to dialog boxes with lists (like the Page Setup Manager) — but do you know about them? Join AutoCAD tipster Lynn Allen as she clues you in on these handy features so you can take advantage of them too! More>>

We Don’t Need No Stinkin’ AutoCAD Cursor Badges! Video
We Don’t Need No Stinkin’ AutoCAD Cursor Badges!   26 Mar, 2018

Do you or don’t you need cursor badges in AutoCAD? Join Lynn Allen as she shows you the ins and outs of cursor badges, including the bizarre setting you can use to turn them off!More>>

Become a Master of the AutoCAD Cursor! Video
Become a Master of the AutoCAD Cursor!   12 Mar, 2018

We stare at the AutoCAD cursor all day long — but is it really set up the way that works best for you? Join Lynn Allen as she shows you how to master all things related to the cursor, including a new AutoCAD command that completely changes its appearance. You’ll even learn a couple of ways to...More>>

Importing PDFs into AutoCAD: Data Integrity and Image Files Video
Importing PDFs into AutoCAD: Data Integrity and Image Files   26 Feb, 2018

In this final installment of my series on importing PDF files into AutoCAD as objects, you’ll learn about some of the bad news — data integrity — as well as find out how you can control the location of the imported raster images (PNG files). More>>

Convert Single-Line Text to Paragraph Text in AutoCAD Video
Convert Single-Line Text to Paragraph Text in AutoCAD   12 Feb, 2018

So you’ve converted your SHX text to single-line MTEXT in AutoCAD (after inserting it from a PDF). But you really wish it were in paragraph format so you could modify the width, and maybe even change the numeric order or bullets! Join Lynn Allen as she shows you how easy it is to convert your...More>>

Convert SHX Text from PDF Files to MTEXT in AutoCAD Video
Convert SHX Text from PDF Files to MTEXT in AutoCAD   22 Jan, 2018

Let’s face it — we still have plenty of AutoCAD drawings with SHX fonts in them! Adobe PDF files aren’t quite sure what to make of SHX text; consequently, they don’t save the info needed to convert back to MTEXT when re-inserted into AutoCAD. What does that mean to you? That means your SHX...More>>

Import PDF Files as AutoCAD Objects Video
Import PDF Files as AutoCAD Objects   8 Jan, 2018

You asked for it, and you finally got it: The No. 1 item on the AutoCAD Wish List has been granted in AutoCAD 2017. Join Lynn Allen as she shows you how easy it is to bring a PDF file into AutoCAD and convert it to AutoCAD objects (as well as some tricks for doing so).More>>

AutoCAD Tips!

Lynn Allen

In her easy-to-follow, friendly style, long-time Cadalyst contributing editor Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD Video Tips. Subscribe to the free Cadalyst Video Picks newsletter, and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!

Follow Lynn on TwitterFollow Lynn on Twitter





Download Cadalyst Magazine Special Edition