Management

Clean Up Lines with AutoCAD's Change Command

26 Oct, 2015

The Change command is an old command, but a trusty one (especially if you work on drawings created by AutoCAD amateurs). Join Autodesk Evangelist Lynn Allen as she shows you how to quickly clean up lines that don’t meet perfectly, and how to force lines to be orthogonal.

Video Transcript

Hello there, this is Lynn Allen. Thanks for joining me for another AutoCAD tip, courtesy of Cadalyst magazine. I hope you are having a great week so far. Mine's going pretty well.

Today I'm going to share with you an add-on to a tip that I gave you five years ago. I'm sure you've seen all of my video tips since, right? I'm sure I look exactly the same as I did five years ago, right? That would be nice. I'm going to share with you a tip that has to do with the Change command. The Change command has been around since the very early days of AutoCAD. That means that it was back when dinosaurs roamed the Earth. It is an old, dusty command. But I'm telling you it comes in handy. It can do some things that takes many more steps in the new commands inside of AutoCAD.

For example, if you take a look at this drawing, these lines look like they are going horizontal, but they are off by just a little bit. We've all worked with people who think they know AutoCAD, but they really don't. They probably shouldn't be using it.

This command comes in handy when you are dealing with people like that. I want those to be horizontal, all right? There are variety of different ways of doing it, including erasing them and doing them again. Let me show you how it's done with the Change command. The Change command is so old that you have to type it in. It's not in the Ribbon or menu or anything; it's not worthy of that, apparently.

I'm going to grab these three lines that are not horizontal. Here's the catch. You have to have the Ortho on, otherwise very different events will occur. Now basically what you are going to do (let's turn on my object snaps), you pick the point that you want to use as the new endpoint for these lines where the x is, and you'll see it straighten them all out. It kept the beginning points, the start points of the lines, and I just modified the other so they will be horizontal. And then you can change the endpoints if you needed to. Nevertheless, they are horizontal. Yay! Saved me some steps. Better than drawing them all over again.

So here's another situation. Those lines look like they all converge on that corner. But then, have you ever done this? You zoom in, and you find out they did not use object snaps. It's not that hard, people! So what do you do? I suppose you could fill it with a zero degree radius. You could erase them and start all over again. I'm going to show you how to do it with just one command — the Change command. Easy steps.

Let's go back in the Change command. Now this time I need my Ortho off, otherwise they are all going to end up going horizontally or vertically. That's not what we want. I'm going to come in here, and I'm going to select all of these objects. Now you are going to pick the point where you want the real convergence point to be — the end point of all those lines. Which one do you want that to be? Let's zoom in. I'd like it to be that point right in there, right in the middle. Now watch all the lines. Check it out! One command. One step. It's all fixed. You don't have to get too mad at the guy that made that terrible mistake, well maybe actually you probably should anyway. Easy, easy, easy.

So those are two more tips with the change command. Really handy command that's top secret. Nobody knows about it except for you and me. Impress your friends. I'll see you back here in two more weeks.

 


Add comment

Note: Comments are moderated and will appear live after approval by the site moderator.

Cadalyst Video Gallery
Migrate Your AutoCAD Settings Between Computers Video
Migrate Your AutoCAD Settings Between Computers   29 Nov, 2016

You just bought a shiny new computer and installed the latest release of AutoCAD. Your amazing custom settings, however, are still on your old computer! How can you move them from one computer to another? Join Lynn Allen as she shows you three different solutions for migrating custom settings, and...More>>

Working with Tools in MicroStation Video
Working with Tools in MicroStation   28 Nov, 2016

This tutorial shows new users of Bentley MicroStation software how to select tools, change tool settings, follow status bar prompts, and customize mouse buttons.More>>

What Is Dynamo? Video
What Is Dynamo?   28 Nov, 2016

This tutorial introduces viewers to a visual programming plugin that helps Revit users harness generative design methodologies.More>>

Migrating Custom Settings in AutoCAD Video
Migrating Custom Settings in AutoCAD   14 Nov, 2016

When moving to a new release of AutoCAD, you are prompted to migrate your custom settings (such as Profiles and the CUI)? What happens if you bypass that option? How do you get back to it? Join Lynn Allen as she shows you how to migrate your settings after the fact to ensure you don’t lose all of...More>>

Mesh Data Import in Fusion 360 Video
Sponsored: Mesh Data Import in Fusion 360   14 Nov, 2016

A new “mesh” workspace enables Fusion users to edit STLs and OBJs.More>>

Sponsored: Freeform Design in Fusion 360 Video
Sponsored: Freeform Design in Fusion 360    24 Oct, 2016

This Autodesk video shows how easy it is to sculpt your designs by simply pressing and pulling vertices, edges, and faces until the design comes to shape.More>>

Customize Your AutoCAD Tooltips Video
Customize Your AutoCAD Tooltips   24 Oct, 2016

Tooltips pop up all over our displays — now it’s time to take control of them! In this video from Cadalyst and Autodesk Evangelist Lynn Allen, you’ll see how to manage the timing of AutoCAD’s tooltips and customize them to your liking.More>>

Trlby Innovative Owner, Bob Mileti, on Surface Video
Sponsored: Trlby Innovative Owner, Bob Mileti, on Surface   14 Oct, 2016

In this Microsoft Surface video, an industrial designer describes how the device makes it possible to do his job in new and better ways.More>>

AutoCAD Tips!

Lynn Allen

In her easy-to-follow, friendly style, long-time Cadalyst contributing editor and Autodesk Technical Evangelist Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD video tips. Subscribe to the free Cadalyst Video Picks newsletter and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!

Follow Lynn on TwitterFollow Lynn on Twitter





Download Cadalyst Magazine Special Edition