Hot Tip Harry: Tips from our Readers -- March 200515 Mar, 2005 By: Bill Kramer Cadalyst
Automatic call-out numbering, object shadowing, copying objects to the Windows clipboard and three drawing management tips.
Sure enough, the CD was from Harry. His image blurred onto the screen as an MPG. "Make sure these get to your readers. They are important. No time to explain." In the background I heard a foghorn and the bell of a streetcar. "What was he up to now?" I wondered. I didn't find as many tips as usual; were things drying up out there?
Creating Order out of Call-Outs
The first tip came in from Scott Restmeyer. Automatic Numbering (Tip #2018) is a very useful tool for maintaining drawings that contain labels. If you have lots of call-outs in your drawings that consist of a standard prefix string followed by an incrementing number and a possible suffix string, then this utility is great. It quickly replaces the existing text with new text using the sorting option of your choice. Place the LSP and DCL files in a folder that AutoCAD can locate, then load the LSP file. Once loaded, type DDNUMB and a dialog box will appear. Follow the directions in the dialog box, fill in the blanks where you want, press the OK button and the results appear as in figures 1 and 2.
Figure 1. Running the Automatic Numbering tool.
Figure 2. Results of running the Automatic Numbering tool.
The ZIP file contains a document (and PDF) detailing how the program works, along with the LISP source code, a dialog box, an icon to use in a menu and instructions of how to build the utility into your current menu system. That's quite a bit more than you will normally find! Thanks, Scott, for a nice function set.
Lurking in the Shadows
Our next tip is not a difficult programming trick but instead a simple yet powerful utility. Shadow Fade (Tip #2019) from Roy Lackey makes copies of objects along a given direction as if they were attached to a cylindrical object, such as this simple shaft representation (figure 3).
Figure 3. This simple shaft representation is a result of running the Shadow Fade utility.
To create this drawing, all I did was draw a series of rectangles, then add lines from the midpoint of one base to the midpoint of the next. The next step was to run the macro. Load the FADE.LSP file to access the FADE function from the Command line. Type FADE, then select one of the centerlines. Indicate the start and stop as being from the base of the centerline to the base of one edge, then input the number of copies to make. I used 35 copies to achieve a nice-looking 3D effect. Nice and useful, Roy.
A Clip Tip You'll Flip For
Did you ever wish you could clip parts out of a drawing just by selecting a rectangle? Cut a Hole (Tip #2020) from Tommy Holder may be just what you are looking for. Load and run this utility and you'll see the amazing results (figure 4).
Figure 4. The results of running the Cut a Hole utility.
You can cut a hole into the drawing and place the entities elsewhere via the clipboard. Load the LSP file then type CCNA at the AutoCAD Command prompt. The function prepares a couple of layers, then asks if you'd like some instruction on using the utility. The default answer is No, and after pressing the enter key you are asked to select the two points defining the rectangular cut-out section. You can copy the objects to the clipboard only for use in other Windows applications or use the Paste option to insert them back into your drawing. This function draws a rectangle where the cut is made and performs a variety of AutoCAD commands automatically to achieve a very useful result. A tip of the hat from Harry to Tommy for a job well done.
Manage Those Drawings
The next three tips all deal with the same subject, drawing management. Drawing management is more than keeping track of where everything is stored. It is also about keeping things trim, clean and to the standards in use by you and your organization. Starting simple, AEC Point Change (Tip #2021) from Leland P. Leahy changes the point inserts used in Autodesk's Land Development package to point blocks. Although this function may be of use only to those using the Land Development system and desiring an interface to the older style of data storage, it does serve as a worthwhile example of how easy it is to write an level substitution in LISP.
As to keeping the drawings trim and lean, Drawing Clean Up (Tip #2022) from James Ozburn shows the simple and direct approach. His function, named (C:PA), is stored in CLEANUP.LSP and is very simple. In fact, all it does is run a stream of commands to change the current drawing to match the standards employed where James works. You can quickly modify the simple code to match your own standards. This sort of utility is very handy when accepting drawings from outside sources that may contain embedded settings you normally do not use.
Taking the clean-up operations to the directory level is Directory Clean Up (Tip #2023) by Andrzej Gumula. This function is really a great example of how objects in Windows and AutoCAD can be exploited by Visual LISP. There are demonstrations of using the SHELL application to display a dialog box for selecting a folder, loading drawings for manipulation while not loosing Visual LISP control and much more. To run this utility, load the LSP file, then type PurgeFiles at the AutoCAD command line. A dialog box appears. Select the folder that holds the drawings. The program then asks if you would like to include subfolders with the default answer as Yes. From there, the rest is automatic as the program loads each drawing in the folder selected and performs a purge all. Fantastic work Andrzej -- a tip from a master, indeed!
Harry concluded his CD with another MGP video telling me to let you all know that he really needs those tips. The boss is offering up the big bucks again: $1,000 for the best tip of the year. Send in the LISP, VBA or ARX source code for consideration.
When submitting tips for Hot Tip Harry, please remember that source code must be provided. You also should try not to use any programming tools other than those provided in the standard AutoCAD package. By following these simple guidelines, you increase the chances of your tip being included in Harry's library, and you increase the number of downloads your tip will have from all AutoCAD users.
Thanks to everyone who submitted tips -- and keep on programming!
In her easy-to-follow, friendly style, long-time Cadalyst contributing editor Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD Video Tips. Subscribe to the free Cadalyst Video Picks newsletter, and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!