Management

Three Ways to Put a Frame around Your Text in AutoCAD

28 Sep, 2015

If you’ve ever needed to put a frame around your AutoCAD text objects, then you’ll appreciate this quick tip from Autodesk Evangelist Lynn Allen who shows you three very different ways to accomplish that very goal — all with different advantages!

Video Transcript

Hello there, this is Lynn Allen. Thank you so much for joining me for another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. I'm coming to you from Santiago, Chile, where it is really quite cold. So that would mean that it is chilly in Chile. Oh yeah, I said it. Let's move along.

Today I'm going to be sharing with you three different ways to put a boundary around your text — three different ways of going about it. That's something that we end up having to do from time to time.

The first way is probably the most logical. Maybe not the fastest or easiest, but by all means, there's nothing wrong with simply going into the Rectangle command and drawing a good old rectangle around your text. Of course, you can control the width, you can control the layer, so on and so forth. That's pretty basic. I'm going to undo that. Not very exciting. Makes it a little tougher for you to control the exact distance the rectangle is from the text. Am I right?

Okay, let's take a look at an Express Tool that may not be very obvious because the name of the Express Tool is TCircle, which makes you think that it's only going to allow you to put a circle around objects. But in reality, it will let you do other things as well. It allows you to do rectangles, and it allows you to do slots around objects. I'm going to go ahead and select this text over here.

You'll see that it asks you for an offset factor. I like that. That's a little bit easier than using the Rectangle command. So I have complete control of the size of that rectangle that's going to go around my text. Here you'll see — enclose text with circles, slots, or rectangles. I'm in for rectangles, and I want the same distance all the way around it. There you'll see that I very quickly, very easily now have a boundary around my text. That's number 2.

The last one is only for those of you who have AutoCAD 2016. It's got kind of an interesting way of going about it. I'm going to select this mtext over here. I'm going to go into Properties, and you'll see if I slide this down, there is a new option inside of AutoCAD 2016, only in Properties. Don't ask me how to get to it any other way.

It allows you to say — you can see it showing up already — it allows me to say "Yes." It will put a frame around my text, as it likes to call it there — rectangle around my text. Do I have any control over exactly the size of the rectangle, how far off it is from the text — absolutely not. I have no idea how to control that. But it is a fast, speedy way to put text — excuse me, to put a boundary box around your text. The trick there is you have to — you can't do it in the MText Editor, you can't do it as you are putting the text on the screen. You have to put the text on the screen and in your drawing file, and then go into Properties.

So that is three different ways to put a bounding box or a frame or a rectangle — whatever you want to call it — around your text. Pick the one that's easiest for you to work with and does the job for you. I will see you back here in two more weeks. Take care.


Add comment

Note: Comments are moderated and will appear live after approval by the site moderator.

Comments

Re: Three Ways to Put a Frame around Your Text in Auto...
by: Gilbone
on:
October 24, 2017 - 12:52pm
Control the size of the Text Frame by setting the Background Mask size.
 
Re: Three Ways to Put a Frame around Your Text in Auto...
by: rickwitt
on:
December 21, 2016 - 12:46pm
#1 Agreed. Rectangles have their uses, but are clumsy. #2 The Express Tool is nice but the capsule, box or circle is not grouped with the text and cannot be moved together. #3 The Properties solution works, and "groups" the element and text together, BUT it only works with MTEXT, not TEXT.
 
Re: Three Ways to Put a Frame around Your Text in Auto...
by: Kirin
on:
October 17, 2015 - 1:42pm
There are two more ways as long as I know of. One is using MLeader with a frame on, then I take out the leader. You can change the text justification if you like. When you revise the text, the frame automatically updates. One more way is making a frame block and make it into a dynamic block with stretch function. If you add non plot line(s) and/or insertion point as guideline to the dynamic block, it will make the block even better.
 
Re: Three Ways to Put a Frame around Your Text in Auto...
by: BAGlover
on:
September 30, 2015 - 4:31pm
Lynn, You actually can control the distance between the frame and the text. 1. Select the text and open the Properties palette. 2. Turn the Background Mask on and set the Border Offset Factor to 3.0. 3. Then turn the Text Frame on in the Properties Palette. The distance between the text and the frame will be greater than the standard default. You can turn the Background Mask off at this point and the spacing will remain set. Future text boxes will be created at the default spacing, but can easily be changed via Match Properties. You forgot to mention the best reason for using the Text Frame option. The Text frame automatically changes size with the text if the note gets larger/smaller, or if the text font size changes. -Brian-
 
Re: Three Ways to Put a Frame around Your Text in Auto...
by: KarenSue
on:
September 28, 2015 - 12:47pm
Lynn, you have way too much fun, girl!! Awesome tip to share! Thanks!
 
Cadalyst Video Gallery
AutoCAD Tip on Tracking Video
AutoCAD Tip – Hip Tip on Tracking   17 Mar, 2009

You may know how to use Tracking to update your dimensions, but you can use it at any time on any type of object.More>>

Reverse Search for Xref in AutoCAD Video
AutoCAD Tip – Where Did You Use That Xref   3 Mar, 2009

We all know how to check our drawing files for attached external references (XREFs)...but have you ever wished you could do a "Reverse Search"? Check out the search capabilities of Design Center, which allows you do find which drawings a specific drawing is referenced INTO.More>>

AutoCAD Layer Properties per Viewport Video
AutoCAD Tip – Layer Properties per Viewport   17 Feb, 2009

Sometimes we want an object to be two different colors in two different viewports. It sounds simple, but it can be quite cumbersome. Lynn shows you just how easy it can be! (Works in AutoCAD 2008-2010.)More>>

AutoCAD Dimension Tricks Video
AutoCAD Tip – Dimension Tricks   3 Feb, 2009

Lynn shares some easy dimension tricks for evenly spacing out baseline dimensions, breaking dimension lines that cross, and adding a jog line. (Works in AutoCAD 2008-2010.)More>>

Add Dimensions Shortcut in AutoCAD Video
AutoCAD Tip – Add Dimensions Shortcut   20 Jan, 2009

Adding dimensions to someone else's AutoCAD drawings can be frustrating because you aren't aware of all their settings! This speedy trick makes it easy for you to quickly add dimensions that match perfectly. (AutoCAD 2002 and later)More>>

Quickly Locate the Objects You Need in AutoCAD Video
AutoCAD Tip – Quickly Locate the Objects You Need   6 Jan, 2009

Quick Select is a powerful command that can be used to find specific objects (or groups of objects) based on their properties. This underused command has been in AutoCAD for many releases and is certain to save you time while editing!More>>

AutoCAD Tips for Tables Video
AutoCAD Tip – Tips for Tables   16 Dec, 2008

Check out this batch of tips for AutoCAD tables, which have been around for several AutoCAD releases. Learn to use Autofill, which came along in AutoCAD 2008.More>>

AutoCAD DC Online and Autodesk Seek Video
AutoCAD Tip – DC Online and Autodesk Seek   2 Dec, 2008

Use Design Center Online and the new Autodesk Seek to grab existing content from the Internet to incorporate in your drawings. (DC Online works with AutoCAD 2000 and later.)More>>

AutoCAD Tips!

Lynn Allen

In her easy-to-follow, friendly style, long-time Cadalyst contributing editor Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD Video Tips. Subscribe to the free Cadalyst Video Picks newsletter, and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!

Follow Lynn on TwitterFollow Lynn on Twitter





Download Cadalyst Magazine Special Edition