cadalyst
AutoCAD

How to Draw Clockwise Arcs and Fillet an Open Polyline to Itself

9 Aug, 2015

AutoCAD loves to draw arcs counter-clockwise — but what if you need clockwise? Autodesk Evangelist Lynn Allen shows you how to insist on a clockwise arc with the push of one button and how to fillet an open polyline to itself!

Video Transcript

Hello there, this is Lynn Allen. Welcome to another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. As you can see, I'm coming to you from yet another hotel room. This time in Phoenix, Arizona, and it's about 110 degrees outside. So I'm happy to be inside. Yay, air conditioning.

Today I'm going to share two tips that I think you'll find valuable and be able to use. The first tip has to do with something so simple — just drawing an arc. I'm going to go into the Arc command, and I'm going to do the Center option because it's the best way to show this. Now as you know through the years, the Arc command loves to draw arcs that are counterclockwise. When you try to draw it clockwise, it's like "Oh no, it's not going to go like that." It always wants to draw it counterclockwise. Really cool feature that was put in a couple of releases ago is the ability to override that command.

By holding down the Ctrl key, AutoCAD will let you break that rule. Now I can draw an arc that is clockwise. It's something that if nobody tell you about, you're never going to know. Very, very simple. Let it go, and it goes back to counterclockwise. That's my first tip. Don't forget that when you are drawing an arc. Of course, over the years, people have managed to get around that. Now you don't have to.

The other feature, also put in a couple of releases ago, is the ability to fillet an open polyline to itself. Now in the past, if I tried to fillet an open polyline to itself, AutoCAD would once again be like, "Oh, no. It's not going to go like that." Bossy AutoCAD.

I'm going to show you what I'm talking about. Another thing that if nobody tells you about this feature, you are just going to continue to think that it's not available and can't do it. You can see this polyline, isn't it cute. I'm going to go into the Fillet command and very simply select the two endpoint there. It doesn't matter if they are polyarcs or straight polylines, I can now easily go in and fillet that open polyline to itself. Double awesome!

So there you learned two tips that I hope you'll be able to apply. Thank you so much for joining me. I'll see you back here in two more weeks. Peace out.


Add comment

Cadalyst Video Gallery
Sponsored: Freeform Design in Fusion 360 Video
Sponsored: Freeform Design in Fusion 360    23 Oct, 2016

This Autodesk video shows how easy it is to sculpt your designs by simply pressing and pulling vertices, edges, and faces until the design comes to shape.More>>

Customize Your AutoCAD Tooltips Video
Customize Your AutoCAD Tooltips   23 Oct, 2016

Tooltips pop up all over our displays — now it’s time to take control of them! In this video from Cadalyst and Autodesk Evangelist Lynn Allen, you’ll see how to manage the timing of AutoCAD’s tooltips and customize them to your liking.More>>

Trlby Innovative Owner, Bob Mileti, on Surface Video
Sponsored: Trlby Innovative Owner, Bob Mileti, on Surface   13 Oct, 2016

In this Microsoft Surface video, an industrial designer describes how the device makes it possible to do his job in new and better ways.More>>

Mobile Design Flexibility with Solid Edge Video
Sponsored: Mobile Design Flexibility with Solid Edge   13 Oct, 2016

This video from Siemens PLM demonstrates finger gesture and stylus operation of a full 3D CAD design session on the touch screen Microsoft Surface Pro tablet.More>>

Cloud Solve in Fusion 360 Video
Sponsored: Cloud Solve in Fusion 360   12 Oct, 2016

This video from Autodesk explores using the infinite power of the cloud to solve multiple studies at once.More>>

The Fastest Way to Draw a Square in AutoCAD Video
The Fastest Way to Draw a Square in AutoCAD   9 Oct, 2016

You likely already know how to draw polygons — but have you used the powerful (and speedy) Edge option? Join Lynn Allen as she shows you the fastest way to draw a square in AutoCAD, and demonstrates just how easy it is to draw polygons using Edge.More>>

Protect Your AutoCAD System Variables Video
Protect Your AutoCAD System Variables   25 Sep, 2016

We all have our favorite system variables, along with their preferred settings in AutoCAD. Have you ever run an AutoLISP routine that changed a system variable without your knowledge? System Variable Monitor to the rescue! Join Lynn Allen as she shows you how to protect your valuable system...More>>

Override XREF Objects That Are Not Set to BYLAYER Video
Override XREF Objects That Are Not Set to BYLAYER   11 Sep, 2016

Have you ever tried to change the properties of an object within an external reference that is not set to BYLAYER? If so, you know that just doesn’t work! In this video tip, Lynn Allen shows you how the XREFOVERRIDE system variable can come to your rescue.More>>



Download Cadalyst Magazine Special Edition