cadalyst
AutoCAD

How to Draw Clockwise Arcs and Fillet an Open Polyline to Itself

9 Aug, 2015

AutoCAD loves to draw arcs counter-clockwise — but what if you need clockwise? Autodesk Evangelist Lynn Allen shows you how to insist on a clockwise arc with the push of one button and how to fillet an open polyline to itself!

Video Transcript

Hello there, this is Lynn Allen. Welcome to another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. As you can see, I'm coming to you from yet another hotel room. This time in Phoenix, Arizona, and it's about 110 degrees outside. So I'm happy to be inside. Yay, air conditioning.

Today I'm going to share two tips that I think you'll find valuable and be able to use. The first tip has to do with something so simple — just drawing an arc. I'm going to go into the Arc command, and I'm going to do the Center option because it's the best way to show this. Now as you know through the years, the Arc command loves to draw arcs that are counterclockwise. When you try to draw it clockwise, it's like "Oh no, it's not going to go like that." It always wants to draw it counterclockwise. Really cool feature that was put in a couple of releases ago is the ability to override that command.

By holding down the Ctrl key, AutoCAD will let you break that rule. Now I can draw an arc that is clockwise. It's something that if nobody tell you about, you're never going to know. Very, very simple. Let it go, and it goes back to counterclockwise. That's my first tip. Don't forget that when you are drawing an arc. Of course, over the years, people have managed to get around that. Now you don't have to.

The other feature, also put in a couple of releases ago, is the ability to fillet an open polyline to itself. Now in the past, if I tried to fillet an open polyline to itself, AutoCAD would once again be like, "Oh, no. It's not going to go like that." Bossy AutoCAD.

I'm going to show you what I'm talking about. Another thing that if nobody tells you about this feature, you are just going to continue to think that it's not available and can't do it. You can see this polyline, isn't it cute. I'm going to go into the Fillet command and very simply select the two endpoint there. It doesn't matter if they are polyarcs or straight polylines, I can now easily go in and fillet that open polyline to itself. Double awesome!

So there you learned two tips that I hope you'll be able to apply. Thank you so much for joining me. I'll see you back here in two more weeks. Peace out.


Add comment

Cadalyst Video Gallery
AutoCAD Video Tips: Save Layer States with Named Views Video
Save AutoCAD Layer States with Named Views   24 Jun, 2018

Yes, you heard that right: You can save your layer settings along with a named view. Just think of all the time you’re going to save! Join AutoCAD Tipster Lynn Allen as she shows you how to add this powerful AutoCAD tool to your arsenal!More>>

Navigate AutoCAD Drawings at Lightning Speed with Named Views Video
Navigate AutoCAD Drawings at Lightning Speed with Named Views   10 Jun, 2018

Are you tired of zooming in and zooming out to find the desired location in a drawing? Named Views to the rescue! Now you can save specific areas in your drawings as views and jet straight to them, efficiently and speedily. Join Lynn Allen as she shows you the power of Named Views, and you’ll...More>>

AutoCAD Video Tips: Create Smart Centerlines Video
Calling All AutoCAD Center Marks   13 May, 2018

Mastering center marks is easier than ever, thanks to changes introduced in AutoCAD 2017. Join AutoCAD tipster Lynn Allen as she takes you through the ins and outs of creating and editing, so you can become a supreme center mark and centerline guru!More>>

Create Smart Centerlines in AutoCAD Video
Create Smart Centerlines in AutoCAD   22 Apr, 2018

It’s not uncommon to add centerlines while dimensioning -- but are your centerlines smart? AutoCAD tipster Lynn Allen shows you the ins and outs of associative centerlines, and explains how to disassociate and reassociate them! More>>

AutoCAD Dialog Box Tips You Need to Know Video
AutoCAD Dialog Box Tips You Need to Know   8 Apr, 2018

AutoCAD 2017 added a few nice enhancements to dialog boxes with lists (like the Page Setup Manager) — but do you know about them? Join AutoCAD tipster Lynn Allen as she clues you in on these handy features so you can take advantage of them too! More>>

We Don’t Need No Stinkin’ AutoCAD Cursor Badges! Video
We Don’t Need No Stinkin’ AutoCAD Cursor Badges!   25 Mar, 2018

Do you or don’t you need cursor badges in AutoCAD? Join Lynn Allen as she shows you the ins and outs of cursor badges, including the bizarre setting you can use to turn them off!More>>

Become a Master of the AutoCAD Cursor! Video
Become a Master of the AutoCAD Cursor!   11 Mar, 2018

We stare at the AutoCAD cursor all day long — but is it really set up the way that works best for you? Join Lynn Allen as she shows you how to master all things related to the cursor, including a new AutoCAD command that completely changes its appearance. You’ll even learn a couple of ways to...More>>

Importing PDFs into AutoCAD: Data Integrity and Image Files Video
Importing PDFs into AutoCAD: Data Integrity and Image Files   25 Feb, 2018

In this final installment of my series on importing PDF files into AutoCAD as objects, you’ll learn about some of the bad news — data integrity — as well as find out how you can control the location of the imported raster images (PNG files). More>>



Download Cadalyst Magazine Special Edition