cadalyst
AutoCAD

How to Draw Clockwise Arcs and Fillet an Open Polyline to Itself

10 Aug, 2015

AutoCAD loves to draw arcs counter-clockwise — but what if you need clockwise? Autodesk Evangelist Lynn Allen shows you how to insist on a clockwise arc with the push of one button and how to fillet an open polyline to itself!

Video Transcript

Hello there, this is Lynn Allen. Welcome to another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. As you can see, I'm coming to you from yet another hotel room. This time in Phoenix, Arizona, and it's about 110 degrees outside. So I'm happy to be inside. Yay, air conditioning.

Today I'm going to share two tips that I think you'll find valuable and be able to use. The first tip has to do with something so simple — just drawing an arc. I'm going to go into the Arc command, and I'm going to do the Center option because it's the best way to show this. Now as you know through the years, the Arc command loves to draw arcs that are counterclockwise. When you try to draw it clockwise, it's like "Oh no, it's not going to go like that." It always wants to draw it counterclockwise. Really cool feature that was put in a couple of releases ago is the ability to override that command.

By holding down the Ctrl key, AutoCAD will let you break that rule. Now I can draw an arc that is clockwise. It's something that if nobody tell you about, you're never going to know. Very, very simple. Let it go, and it goes back to counterclockwise. That's my first tip. Don't forget that when you are drawing an arc. Of course, over the years, people have managed to get around that. Now you don't have to.

The other feature, also put in a couple of releases ago, is the ability to fillet an open polyline to itself. Now in the past, if I tried to fillet an open polyline to itself, AutoCAD would once again be like, "Oh, no. It's not going to go like that." Bossy AutoCAD.

I'm going to show you what I'm talking about. Another thing that if nobody tells you about this feature, you are just going to continue to think that it's not available and can't do it. You can see this polyline, isn't it cute. I'm going to go into the Fillet command and very simply select the two endpoint there. It doesn't matter if they are polyarcs or straight polylines, I can now easily go in and fillet that open polyline to itself. Double awesome!

So there you learned two tips that I hope you'll be able to apply. Thank you so much for joining me. I'll see you back here in two more weeks. Peace out.


Add comment

Cadalyst Video Gallery
Master the Undo Command Video
AutoCAD Video Tips: Master the Undo Command   28 Aug, 2017

So you think you can Undo? There’s so much more to it than just using the simple U command. Join Lynn Allen as she shows you a few of the many options in AutoCAD’s Undo command — and puts you on the road to instant productivity!More>>

Copy Multiple Objects out of Xrefs Video
AutoCAD Video Tips: Copy Multiple Objects out of Xrefs   14 Aug, 2017

If you want to copy a large group of objects out of an external reference (xref) and don’t want to use the painful NCopy command that forces you to pick them one at a time, then you’ll love this tip! More>>

Constrain Cable Points in Autodesk Inventor Cable and Harness Video
Constrain Cable Points in Autodesk Inventor Cable and Harness   31 Jul, 2017

This IMAGINiT Tricks tutorial shows how to control complex routing and create component work points as paths to define and constrain cable points. More>>

Close the Gaps in Badly Drawn AutoCAD Drawings Video
Close the Gaps in Badly Drawn AutoCAD Drawings   24 Jul, 2017

Have you ever tried to join lines or plines together that were not contiguous? It can be done, but you have to know the top-secret recipe for doing so! Join Lynn Allen as she shows you how to get rid of the gaps and end up with seamless polylines.More>>

The Fastest Way to Remove a Polyline Segment in AutoCAD Video
The Fastest Way to Remove a Polyline Segment in AutoCAD   10 Jul, 2017

Are you working too hard — are you using PEDIT to remove a segment from a polyline? Join Autodesk Evangelist Lynn Allen as she shows you a super speedy technique to easily remove one or more polyline segments without needing to explode the polyline.More>>

Zoom In on AutoCAD Objects with the View Cube — Even in 2D! Video
Zoom In on AutoCAD Objects with the View Cube — Even in 2D!   26 Jun, 2017

If you want to zoom in on an object with maximum speed, then be sure to check out this super-speedy tip from Cadalyst and Autodesk Evangelist Lynn Allen! Who would have guessed the View Cube could come in so handy in 2D as well?More>>

Create Speedy AutoCAD Paper Space Viewports — the Right Way Video
Create Speedy AutoCAD Paper Space Viewports — the Right Way   12 Jun, 2017

You’ve finished your model, and now you’re ready to print. You just need to set up your paper space layouts with your title block, and viewports to scale. Join Lynn Allen as she shows you the speedy (and correct) route to create viewports, along with a tip or two for those of you who are old...More>>

AutoCAD Video Tips: Speed Up Your Saves Video
AutoCAD Video Tips: Speed Up Your Saves   22 May, 2017

We want to go as quickly as possible in AutoCAD, right? We don’t want to spend a split second longer than necessary waiting for AutoCAD to perform a save. In this tutorial from Cadalyst and Lynn Allen, you’ll see how to speed up any type of save (including automatic saves) so you can get your...More>>

AutoCAD Tips!

Lynn Allen

In her easy-to-follow, friendly style, long-time Cadalyst contributing editor Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD Video Tips. Subscribe to the free Cadalyst Video Picks newsletter, and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!

Follow Lynn on TwitterFollow Lynn on Twitter




Download Cadalyst Magazine Special Edition