CAD Manager's Newsletter (#375)

13 Dec, 2016 By: Robert Green

Peer-Driven CAD Management Solutions

How to succeed as the default CAD manager.

Peer-Driven CAD Management Solutions

During the past few years I've noticed that there are more and more CAD managers who toil away at making things work even though they don't have a formal title or any real authority to manage the CAD office; they're what I call peer-to-peer CAD managers. As I've studied this issue, I've come to realize that many companies are moving away from rigid authority structures toward a more loosely managed, peer-driven structure. Because of this trend, I've been researching ways to manage CAD tools within these environments.

In this edition of the CAD Manager's Newsletter, I'll pass along some strategies I've helped my clients implement, in hopes that you can use them as well. Here goes.

Competency and Leadership

In the old world of corporate management, the mantra was "authority rules," and everyone understood that power structure. Under today's looser management systems, employees tend to respect competency instead, and gravitate toward anyone who has the know-how to get the job done. In my experience, users look up to the alpha software user as the person with the most CAD competency, but it takes more than just software knowledge to function as a CAD manager.

A traditional manager can make employees conform to his or her desires with simple authority, but in a peer-driven management structure, people must want to follow you. How do successful CAD leaders inspire this kind of loyalty from the users in the trenches? I'd like to note a few traits that demonstrate competency and leadership. If you perform in these ways on a daily basis, you'll soon become the next peer-to-peer manager in your workplace.

  • Become the go-to resource. It is widely understood that the person who is the best at finding solutions to CAD problems is the person others look to for help — this is where software competency comes in. Users also need to feel comfortable asking you for help, which is why the next point is important.
  • Be pleasant to work with and easy to talk to. Nobody wants to work with someone who's grouchy, difficult, or sullen, regardless of how competent they are.
  • Make your case by teaching. Think of it this way — if you want people to follow your standards and best practices, they need to understand why they should do so. By teaching, I don't mean formal training sessions, but rather casual, frequent dispensing of tips and productivity-boosting advice. When users get their jobs done faster, they'll have proof of the value of standards and best practices.
  • Don't gripe or complain. Even though all of us have wanted to scream about the frustrations of CAD management at some point, the best managers never let anyone hear them gripe. It is fine to calmly state why things aren't working, but do your best to stay positive and offer solutions rather than complain. Griping makes you much less pleasant to work with (see the second point above) and therefore diminishes the chance that you'll be able to teach and influence users.
  • Talk to project managers. Open the lines of communication early, and keep them that way! The best way to avoid griping is to tell project managers how things could be going better. Project managers do have authority, and they can help you change things if they understand why they should listen to you. Do everything you can to make your project managers your biggest fans, and talk with them often.

It's all fairly straightforward, if you think about it: Know what you're doing and explain your actions to those around you in a pleasant way, and people will come to view you as a credible leader and teacher. Read more »

:: Resources

GrabCAD, Frustrum Launch Quadcopter Challenge
A new challenge on the GrabCAD Community platform challenges entrants to use Generate, a cloud-based generative design software tool from Frustum, to optimize the design of a lightweight, 3D-printed quadcopter with topology optimization. The top designs will be tested in the real world, competing for more than $4,000 in prizes.

:: What's New at

Creating Our Document and Learning How Onshape Works
This tutorial introduces the document page and other basics of Onshape operation. Watch the video »

AutoCAD Video Tips: Working on Someone Else's AutoCAD Drawing
Have you ever needed to update a drawing that you didn't create? You just need to add in a few objects, but you don't want to go through the hassle of figuring out all the assorted settings and styles that were used. Join Lynn Allen as she shows you a couple of tricks that will help you get in and out of the drawing as quickly as possible — without having to find out anything about it! Watch the video »

AMD Embraces Streaming, VR in Its "Biggest Ever" Graphics Software Update
Radeon Pro Software Crimson ReLive Edition is designed to help developers and professional users create and share vivid visual experiences. Read more »

Event Report: Autodesk University 2016, Part 1 — Tomorrow's Design Reality Is Already Here
At its annual user conference, the company details how "futuristic" technologies such as machine learning, generative design, and virtual reality are becoming integral to the CAD workflow. Read more »

About the Author: Robert Green

Robert Green

Add comment

More News and Resources from Cadalyst Partners

For Mold Designers! Cadalyst has an area of our site focused on technologies and resources specific to the mold design professional. Sponsored by Siemens NX.  Visit the Equipped Mold Designer here!

For Architects! Cadalyst has an area of our site focused on technologies and resources specific to the building design professional. Sponsored by HP.  Visit the Equipped Architect here!