Eurocom Panther 4.0

20 Mar, 2013 By: Art Liddle

First Look Review: This mobile workstation delivers a brilliant display, good memory and storage capacity, and terrific speed — but shouldn’t stray far from an outlet.

Test Results

We ran our standard benchmarks to gauge the CAD performance: our own Cadalyst c2012 (running AutoCAD 2012) and SPECviewperf 11. Before starting any tests, we set AutoCAD to hardware acceleration and turned off vertical sync for the graphics card. We then set the display resolution to 1,280 x 1,024 with 32-bit color. The operating system was the 64-bit version of Windows 7 Professional.

Scores for the Cadalyst c2012 benchmark were as follows: total index of 445, 3D graphics index of 974, 2D graphics index of 340, disk index of 219, and CPU index of 247. These numbers are good for a mobile workstation. The total index mark ranks as a top score for mobile workstations, except for another recently reviewed system that also included a Quadro K5000M graphics card. After closer inspection of the data, we believe that the Panther 4.0 did not take full advantage of the CPU's turbo mode when running our benchmark in AutoCAD.

Scores for the SPECviewperf 11 suite of tests, single-sample mode only, were even better. The weighted scores were as follows: 65.55 for catia-03, 60.97 for ensight-04, 65.97 for lightwave-01, 100.39 for maya-03, 13.80 for proe-05, 54.22 for sw-02, 58.20 for tcvis-02, and 63.05 for snx-01. These scores place the Panther 4.0 in the top three for any type of workstation — desktop or mobile — ever reviewed in Cadalyst Labs.

Battery Performance

The Eurocom Panther 4.0 runs off a Chicony 300-watt A/C power brick that measures 8 1/8" x 4 3/8" x 2 1/8"; that's a bit bigger and heavier than we usually see. When disconnected from the wall, its internal eight-cell (78-Wh) Smart Li-ion battery keeps the Panther 4.0 running for a short time. To test the battery performance, we used the c2012 Battery Rundown Test option, which runs the Cadalyst benchmark test in a continuous loop until battery power is exhausted. We ran the test four times. Under battery power, the Panther 4.0 averaged 42 minutes before powering down. This is well below the average of 75 minutes for the seven mobile computers we have reviewed in the past two years. As for recharging, the battery required a full twelve hours to reach a complete charge with the system on. With the system turned off, the recharge time was less than three hours. This mobile computer is meant to operate primarily on A/C power.

Wrap Up

The Eurocom Panther 4.0 mobile workstation offers enough computing and graphics power to tackle all but the most demanding tasks. It is loaded with system memory, offers an excellent display, and has tremendous room to grow when it comes to hard drive storage.

Packing this much power and all these robust features into a mobile computer comes at a price — in this case, $7,983. That includes Eurocom's one-year return-to-factory-depot warranty and one year of technical support.

If you can afford the price, require this kind of power and expandability in a mobile system, and do not expect to spend much time off the power grid, the Eurocom Panther 4.0 is worth serious consideration.

1 2 

About the Author: Art Liddle

Add comment

More News and Resources from Cadalyst Partners

For Mold Designers! Cadalyst has an area of our site focused on technologies and resources specific to the mold design professional. Sponsored by Siemens NX.  Visit the Equipped Mold Designer here!

For Architects! Cadalyst has an area of our site focused on technologies and resources specific to the building design professional. Sponsored by HP.  Visit the Equipped Architect here!