cadalyst
Management

Lengthen (or Shorten) AutoCAD Lines in a Flash!

8 Nov, 2015

If you need to lengthen lines a specific distance or to a total length, then you should be using the handy Lengthen command! Join Lynn Allen as she shows you how handy the Lengthen command can be when editing your objects.

Video Transcript

Hello there, this is Lynn Allen. Thank you for joining me for another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. Hope you are having a great week so far. So far, so good for me, which makes me happy.

Today I'm going to share with you a tip that has to do with the Lengthen command, which is a command that I find a lot of people either don't know about it or they aren't using it or they forgot about it. It is actually a very handy command. Today we're going to focus on lengthening lines. If you are good, we'll come back and we'll look at arc later.

You can type in the Lengthen command or you can behave yourself and go to the Ribbon, and you can click on the Modify panel of the Home tab of the Ribbon. Right there is the Lengthen command. Very simple command. One of the nice things about the Lengthen command is it will tell you very quickly how long an object is. You can see right there, it told me the current length is 15.

Maybe that's not what I want. Maybe I want to tell it the total length. I wish the total length was 22. You can go ahead and click whichever object you want to be 22 units in length. Notice that it matters which end you go on. Which endpoint is going to determine which side is lengthened. Or you can make it shorter as well. So Lengthen will also make an object shorter, which is counterintuitive. So that was easy enough.

So let's go back into the Lengthen command, and we'll select this line again. Once again, it tell us now it's 22. It really, really did work. Let's try Delta. Delta is how much longer you want the object to be, in this case, it will always lengthen it. Let's say I want it to be 5 units longer. It's very visual. Once again, whichever end you select is the end that it will make longer, that it will lengthen. Pretty straight forward; very visual on the screen.

Let's go back in. This time we're going to do Percent. Let's say I want my object to be 25% of the lengthen that it used to be. You can make it longer. You can say 150%, or you can make it shorter. I'm gong to say 25. So as I move my cursor around, you will see the end that I select is the end is this case is going to be cut off. In this case it's going to be 25% of the total length. I'm only going to get the other side of that line. You can see the same deal. Kind of interesting. Once again you can make it longer by giving it a value higher than 100%. If you make a mistake, of course, you can Undo while you are in the command. Very, very simple. Very straightforward.

Okay, the last option -- we did Delta, we did Percent, we did Total -- is Dynamic. Now to be honest, Dynamic is not really my favorite. To me it's easier to do this with grips using the multi-function grips, but you know, whatever works for you. I'm going to go ahead. You'll see I'm going to select this object, and it tells me now to -- it's only going to lengthen it in the same direction. You should know that. Even if I turn my Ortho off, it's not going to make any difference. It's going to lengthen the line, keeping the angle the same.

So as I move my cursor, you can see it's telling me the distance it's lengthening it, or shortening it, depending on where you go. You can type in a value if you want. I'm going to go ahead and just select. That one's not so exciting. Nevertheless, you will see that back in the Lengthen command, some pretty cool options in there to help you very quickly lengthen or sometimes shorten an object, depending on what you are doing.

I hope that you found that tip to be valuable. We'll take a look at arcs later on. I'm going to see you back here in two more weeks. Take care! Behave.


Add comment

Cadalyst Video Gallery
PowerTrim in AutoCAD! Video
PowerTrim in AutoCAD!   24 Feb, 2019

How could any AutoCAD user possibly resist a command called PowerTrim? You trim and extend all the time in AutoCAD — why not add a tool to your repertoire that amps up the speed of these popular commands! Join AutoCAD tipster Lynn Allen as she shows you how to save time and steps while trimming...More>>

Rid Your AutoCAD Drawings of Spelling Errors Video
Rid Your AutoCAD Drawings of Spelling Errors   10 Feb, 2019

Spelling errors can make you look very unprofessional — but they’re easily prevented! Join AutoCAD tipster Lynn Allen as she shows you how to spell-check any drawing, and gives you customization tips to ensure SPELL gives you the best results possible (including working on external references).More>>

Lazy Layer Tips for AutoCAD Video
Lazy Layer Tips for AutoCAD   27 Jan, 2019

Would you like to change your current layer in fewer clicks? Would you like to move objects to a different layer by simply matching an object on the destination layer? Join AutoCAD video tipster Lynn Allen as she shares a couple of handy layer tricks that will help you get your job done faster!More>>

Easy Metric Conversions with the AutoCAD Quick Calculator Video
Easy Metric Conversions with the AutoCAD Quick Calculator   13 Jan, 2019

We’ve all run into scenarios where we’ve needed to do some type of unit conversion in our drawings. Did you know the Quick Calculator in AutoCAD is a pro at making it easy to do exactly that? Join AutoCAD tipster Lynn Allen as she shows you some of the gems hidden within the Quick Calculator...More>>

Get Fast Answers with the AutoCAD Quick Calculator Video
Get Fast Answers with the AutoCAD Quick Calculator   9 Dec, 2018

You’ve probably seen the AutoCAD Quick Calculator many times — but perhaps you just weren’t quite sure what to do with it. AutoCAD video tipster Lynn Allen will show you that QuickCalc is a very powerful tool, so you can stop ignoring it and start taking advantage of it!More>>

Take Control of Your AutoCAD Options! Video
Take Control of Your AutoCAD Options!   4 Nov, 2018

The AutoCAD Options command controls so many different important elements of AutoCAD — and it can be accessed in a variety of ways (with slightly varying results). Join AutoCAD tipster Lynn Allen as she shows you the many methods for accessing Options, as well as how to control the specific tab...More>>

What’s Up with That AutoCAD DEFPOINTS Layer? Video
What’s Up with That AutoCAD DEFPOINTS Layer?   21 Oct, 2018

We’ve all seen the DEFPOINTS layer in AutoCAD, but how did it get there? Maybe you use this mystery layer to place objects you wish to display but not plot — but what are the perils of doing so, and is there a better solution? Join AutoCAD tipster Lynn Allen as she shows you the advantages...More>>

Manage All Those AutoCAD UI Boxes! Video
Manage All Those AutoCAD UI Boxes!   7 Oct, 2018

There are so many different user interface (UI) boxes in AutoCAD: grip boxes, apertures, object snap markers, etc. Do you have them set up for maximum productivity? Join AutoCAD tipster Lynn Allen as she takes you through the various settings that manage a variety of key UI tools!More>>



Download Cadalyst Magazine Special Edition