cadalyst
Management

Lengthen (or Shorten) AutoCAD Lines in a Flash!

8 Nov, 2015

If you need to lengthen lines a specific distance or to a total length, then you should be using the handy Lengthen command! Join Lynn Allen as she shows you how handy the Lengthen command can be when editing your objects.

Video Transcript

Hello there, this is Lynn Allen. Thank you for joining me for another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. Hope you are having a great week so far. So far, so good for me, which makes me happy.

Today I'm going to share with you a tip that has to do with the Lengthen command, which is a command that I find a lot of people either don't know about it or they aren't using it or they forgot about it. It is actually a very handy command. Today we're going to focus on lengthening lines. If you are good, we'll come back and we'll look at arc later.

You can type in the Lengthen command or you can behave yourself and go to the Ribbon, and you can click on the Modify panel of the Home tab of the Ribbon. Right there is the Lengthen command. Very simple command. One of the nice things about the Lengthen command is it will tell you very quickly how long an object is. You can see right there, it told me the current length is 15.

Maybe that's not what I want. Maybe I want to tell it the total length. I wish the total length was 22. You can go ahead and click whichever object you want to be 22 units in length. Notice that it matters which end you go on. Which endpoint is going to determine which side is lengthened. Or you can make it shorter as well. So Lengthen will also make an object shorter, which is counterintuitive. So that was easy enough.

So let's go back into the Lengthen command, and we'll select this line again. Once again, it tell us now it's 22. It really, really did work. Let's try Delta. Delta is how much longer you want the object to be, in this case, it will always lengthen it. Let's say I want it to be 5 units longer. It's very visual. Once again, whichever end you select is the end that it will make longer, that it will lengthen. Pretty straight forward; very visual on the screen.

Let's go back in. This time we're going to do Percent. Let's say I want my object to be 25% of the lengthen that it used to be. You can make it longer. You can say 150%, or you can make it shorter. I'm gong to say 25. So as I move my cursor around, you will see the end that I select is the end is this case is going to be cut off. In this case it's going to be 25% of the total length. I'm only going to get the other side of that line. You can see the same deal. Kind of interesting. Once again you can make it longer by giving it a value higher than 100%. If you make a mistake, of course, you can Undo while you are in the command. Very, very simple. Very straightforward.

Okay, the last option -- we did Delta, we did Percent, we did Total -- is Dynamic. Now to be honest, Dynamic is not really my favorite. To me it's easier to do this with grips using the multi-function grips, but you know, whatever works for you. I'm going to go ahead. You'll see I'm going to select this object, and it tells me now to -- it's only going to lengthen it in the same direction. You should know that. Even if I turn my Ortho off, it's not going to make any difference. It's going to lengthen the line, keeping the angle the same.

So as I move my cursor, you can see it's telling me the distance it's lengthening it, or shortening it, depending on where you go. You can type in a value if you want. I'm going to go ahead and just select. That one's not so exciting. Nevertheless, you will see that back in the Lengthen command, some pretty cool options in there to help you very quickly lengthen or sometimes shorten an object, depending on what you are doing.

I hope that you found that tip to be valuable. We'll take a look at arcs later on. I'm going to see you back here in two more weeks. Take care! Behave.


Add comment

Cadalyst Video Gallery
Customize Your AutoCAD Cursor Video
Customize Your AutoCAD Cursor    23 Sep, 2018

We work with the AutoCAD cursor all day long … so why aren’t we customizing it to work the way we want to work? Join AutoCAD tipster Lynn Allen as she shows you how to modify the two parts of the AutoCAD cursor for maximum productivity!More>>

Face Fewer Headaches with Xrefs Video
Face Fewer Headaches with Xrefs   9 Sep, 2018

In this final chapter in her series on reducing xref stresses, AutoCAD video tipster Lynn Allen shares two tips to help you save money on painkillers and put you on the road to stress-fee design! Watch as Lynn shows you how to make sure your hard-coded paths are changed from Absolute to Relative,...More>>

blank Video
Find a Home for Orphaned AutoCAD Xrefs   26 Aug, 2018

It’s never a good thing when our AutoCAD xrefs become orphans! Join AutoCAD video tipster Lynn Allen as she shows you how to easily find an xref orphan’s parent drawing in AutoCAD 2018 or higher and quickly resolve the problem. More>>

Search and Rescue for AutoCAD Xrefs Video
Search and Rescue for AutoCAD Xrefs   12 Aug, 2018

Is there anything worse than broken xref links in AutoCAD? They can take hours to correct, depending on the extent of the path damage. Join AutoCAD tipster Lynn Allen to learn some amazing shortcuts to finding and repairing broken links that will save you loads of valuable time! (Applicable to...More>>

Avoid Broken Links in AutoCAD External References Video
Avoid Broken Links in AutoCAD External References    22 Jul, 2018

Let’s face it: We have a love/hate relationship with xrefs! We love them when they work, but we hate them when they don’t! Join AutoCAD tipster Lynn Allen as she shows you how to avoid those pesky broken links when working with external references inside of AutoCAD.More>>

Create Paper Space Viewports from Named Views in AutoCAD Video
Create Paper Space Viewports from Named Views in AutoCAD   8 Jul, 2018

New to AutoCAD 2019 is the ability to easily drag and drop Named Views onto your paper space layouts. Join AutoCAD tipster Lynn Allen as she shows you how to quickly insert those named views (complete with their saved layer settings) and control the various scale factors. Done properly, this...More>>

AutoCAD Video Tips: Save Layer States with Named Views Video
Save AutoCAD Layer States with Named Views   24 Jun, 2018

Yes, you heard that right: You can save your layer settings along with a named view. Just think of all the time you’re going to save! Join AutoCAD Tipster Lynn Allen as she shows you how to add this powerful AutoCAD tool to your arsenal!More>>

Navigate AutoCAD Drawings at Lightning Speed with Named Views Video
Navigate AutoCAD Drawings at Lightning Speed with Named Views   10 Jun, 2018

Are you tired of zooming in and zooming out to find the desired location in a drawing? Named Views to the rescue! Now you can save specific areas in your drawings as views and jet straight to them, efficiently and speedily. Join Lynn Allen as she shows you the power of Named Views, and you’ll...More>>



Download Cadalyst Magazine Special Edition