cadalyst
Visit the CAD Management Resource Center

CAD Management
Who Is Using Workstations, and Why? Article
Who Is Using Workstations, and Why?   15 Aug, 2019

Herrera on Hardware: CAD is the primary driver of today’s professional graphics hardware market, but not the only one. See how CAD users’ workstation needs compare to those of software engineering, digital media, geoscience, and other professionals.More>>

Fine-Tune the Block Palettes in AutoCAD 2020 Video
Fine-Tune the Block Palettes in AutoCAD 2020   12 Aug, 2019

After covering the Block Palette essentials in her previous tip, Lynn’s ready to dive deeper this time around. Join her as she covers some extra tips that will help you fine-tune your block palettes to work the way you want to work!More>>

To Prioritize Your Workload Effectively, Analyze Change and Need, Part 1 Article
To Prioritize Your Workload Effectively, Analyze Change and Need, Part 1   24 Jul, 2019

CAD Manager Column: The degree of change and frequency of need are both important factors in determining which tasks you should be tackling at work.More>>

Meet the Marvelous New Block Palette in AutoCAD 2020 Video
Meet the Marvelous New Block Palette in AutoCAD 2020   22 Jul, 2019

We insert blocks all the time — there's no getting around it! Why not take advantage of the new Block Palette in AutoCAD 2020 and scratch that task off your list in no time? Join AutoCAD tipster Lynn Allen as she shows you all the great features in this new tool, along with the handy Repeat...More>>

Perfect PURGE in AutoCAD 2020 Video
Perfect PURGE in AutoCAD 2020   8 Jul, 2019

The PURGE command in AutoCAD is a great way to keep your drawing files neat and clean. But when it comes to knowing why you can’t purge something, such as a layer, the PURGE command has been sorely lacking! Join AutoCAD tipster Lynn Allen as she shows you the ins and outs of the new updated PURGE...More>>

Calculate the ROI of Today’s CAD Software Article
Calculate the ROI of Today’s CAD Software   26 Jun, 2019

CAD Manager Column: Unsure about whether you should switch to a shiny new CAD application, or implement an intriguing new utility? The ROI never lies, so start crunching numbers!More>>

Lenovo Refines Professional Workstation Designs for Greater Reliability Sponsored
Lenovo Refines Professional Workstation Designs for Greater Reliability   24 Jun, 2019

A workstation manufacturer discusses the company’s strategies to overcome workstation reliability challenges including heat, shock, and the rigors of daily use.More>>

Try the DWG Compare Tool in AutoCAD 2020 Video
Try the DWG Compare Tool in AutoCAD 2020   24 Jun, 2019

You’ve probably been in this situation: You’re faced with two drawings that look similar, but might not be exactly the same! How can you tell if there are any differences? Join AutoCAD tipster Lynn Allen as she shows you how to get the most out of the updated DWG Compare tool inside AutoCAD...More>>

Proactive CAD Training Strategies Article
Proactive CAD Training Strategies   12 Jun, 2019

CAD Manager Column: Dedicating a little time to training in a consistent, thoughtful way will help you ward off problems before they arise. Here’s how to set up a simple, effective training program for your users.More>>

Measure in AutoCAD Twice, Cut as Many Times as You Like! Video
Measure in AutoCAD Twice, Cut as Many Times as You Like!   10 Jun, 2019

You might have tried the Measure command in AutoCAD before, only to be disappointed in the outcome. You just didn’t know the secret to achieving the desired results! Join AutoCAD video tipster Lynn Allen as she shows you how the powerful Measure command can quickly place a block (or point) at...More>>

The Why and How of CAD StandardsWhite Paper: The Why and How of CAD Standards
CAD standards are a much more complex — and perplexing — challenge than in the past. This 15-page guide includes Robert Green's entire four-part series of CAD Manager columns on standards, explaining how to craft standards for the modern CAD ecosystem and more. From the editors of Cadalyst. Download your copy.


A CAD Manager's Guide to Reducing ErrorsWhite Paper: A CAD Manager's Guide to Reducing Errors
This guide from Cadalyst compiles three of Robert Green's well-respected CAD Manager columns: a two-part series on adapting quality control techniques for CAD, and an overview of common CAD management mistakes. Get on the path to greater efficiency, fewer mistakes, and better results! From the editors of Cadalyst. Download your copy.




Fabulous Freebies for CAD Users